How to connect Shelly devices with the e-WNDR app

In order to connect Shelly devices with e-WNDR , you connect your Shelly cloud account with e-WNDR .

This also means that if you purchased any new Shelly devices for use with e-WNDR , you first need to set them up with Shelly. Pleease use the Shelly app and follow its instructions to set up a new device.

Connecting Shelly Plugs and Relays with e-WNDR

Connecting Shelly Plugs and Relays with e-WNDR is simple:

1. Tap on the Shelly section under HVAC and Appliances
2. Enter your Shelly account credentials
3. Select the device you want to connect to e-WNDR

Connecting Shelly Pro 3EM Energy Meters with e-WNDR

The flow is equivalent to the one described above for plugs and relays. But you start in the section Meters in the device configuration of the e-WNDR app. The device selection dialog will show you only Shelly Pro EM meters and no other devices on your account.

Meter type

• Main meter: Grid meter. Can be configured as bi-directional or consumption.
• Production: Measures solar production. Configure as sub meter with type production.
• Sub meter: Measures any type of device as a sub meter and appears in device consumption.

For full setup details with screenshots, see System Setup: Meter Configuration.